ZALMAN FS-C77 FATALITY Fiche technique télécharger pdf (Page 9)

8.3) AMD Sempron/AMD64 - Socket 754/939/940

8.3.1) Fasten Nipples

Place Small Washers on the motherboard. Then put Nipples

over them and fasten the Nipples until the Backplate for

AMD64 is firmly attached to the motherboard on the opposite

side of the CPU.

* A Retention Guide is not necessary for installing the FS-C77

on Socket 754/939/940.

1) Nipple

2) Small Washer

3) Motherboard

4) Backplate for AMD64

1) Grip(L-Type)

2) Nipple

8.3.4) Install the FHS

Set the FHS at the center of the CPU. Screw the Bolts in slightly,

and then tighten each Bolt a few turns at a time while alternating

between the two until the Grips are completely pressed against

the Nipples.

1) Bolt

2) Grip(L-Type)

3) Outer Hole

8.3.3) Install Grips and Bolts

Interlock the L-Type Grips with the Clip. Insert the two

Bolts into the Outer Holes of the Grips.

8.3.2) Apply Thermal Grease

Clean off particles and residue from the top of the CPU then

spread a thin layer of the included Thermal Grease

thoroughly on top of the CPU.

CPU (Lid)

9. Connect Power Cable

Connect the FS-C77’s Fan Connector onto the

motherboard’s CPU Fan header.

4) Motherboard

3) CPU Fan Header

2) FS-C77’s

Fan Connector

1) FS-C77

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

ZALMAN FS-C77 FATALITY Fiche technique Page 9